Back to shop
Desk & Utility
Smart-Telescope Dew Shield (Seestar S50)
₹559 + shipping & GST at checkout
A slip-on dew shield for the ZWO Seestar S50 smart telescope — delays dew and blocks stray side light. 4.86★.
Color
PETG is tougher and more chemical-resistant than PLA at the same ₹4/g, and holds up to about 75 °C. It is the right pick for outdoor, wet, mechanical or food-adjacent parts, and comes in Black or White only.
7–10 business days end to end: about 3–5 days to print and 2–5 in transit with Delhivery, which reaches 19,000+ PIN codes. Your exact cost and days are shown at checkout for your PIN code.
Printed at 0.2 mm layers with 20% infill, and inspected before shipping. Visible layer lines, slight stringing and a tolerance of about ±0.3 mm are normal characteristics of FDM printing rather than defects.
- Secure payment
- Tracked shipping
- GST invoice
Material PETG (premium)
Weight ~68.62 g
Layer height 0.2 mm — inspected before shipping
About this print
A slip-on dew shield for the ZWO Seestar S50 smart telescope: it delays dew forming on the corrector during a long imaging run and shades the lens from stray side light and street lamps. The most-downloaded Seestar accessory on the platform at 4.86★ across 69 reviews, with 528+ documented makes. Printed in weather-resistant PETG. Fits the Seestar S50 (ZWO); this is an independent accessory, not made by or endorsed by ZWO. Does not make the scope safe for solar viewing.
Designed by Jam_2016 — original model on MakerWorld. Licensed CC-BY.